Skirting boards are a vital component to any room and they need to be cut properly in order for the room to look complete. However, most people don’t have access to a mitre saw which makes this task difficult. This blog post will show you how easy it is to cut skirting boards without a mitre saw.
Skirting boards are usually made of MDF, wood, PVC or even plastic. Whatever the material is you are working with, it is important to use the correct technique to cut them. Using a mitre saw is the best way to ensure that the skirting board looks perfect but you can also achieve an almost professional finish by following these steps.
Steps To Cut Skirting Board Without A Mitre Saw:
There are some tools that you will need before you start, these include: tape measure, pencil, hacksaw (this is optional), set square and possibly clamps.
Get A Piece Of Wood That Is The Same Thickness As Your Skirting Board:
This will be used as a guide and it can be discarded after you have finished using it.
Lay the skirting board on the piece of wood that you just cut to size and line up your pencil with the edge: now mark where you want to make your first cut, this should be around 1/8 inch away from the second line as this will make the skirting board look neater when you are finished.
Now Take Your Saw And Make Sure That It Is Parallel To The Line:
This will require some finesse but there should be no real issues with achieving this. You can use a clamp if this helps. Once the saw is lined up, saw down the edge of the skirting board.
You Will Require A Level After This Step To Check That Your Cut Is Level:
If it isn’t then you might need to go over each section once more. Now you can put your newly cut skirting board against the wall and repeat these steps for every skirting board that you need to cut.
Your skirting boards should now look professional and it will be easy to paint them in the colour of your choice.
Measure And Mark Where You Want To Cut:
The end result should be a straight line.
Line Up The Hacksaw With The Line That You Drew:
You can use clamps to hold everything together if this will help. This is an optional step but it helps immensely with the finished product. If you don’t have clamps then there are still other options available.
Saw Along The Line That You Drew In Step 2:
If the pressure is applied slowly then there won’t be any buckling. Make sure to saw at a constant rate.
Now you should have your skirting boards cut perfectly without the use of a mitre saw or even clamps. This technique uses inexpensive tools that can be found in almost any household and it will save you money on buying a mitre saw. This is the perfect technique for those who are on a budget but still want their rooms to look great.
This may require a little bit of elbow grease but there should be no issues with achieving this, especially if you have an electric hacksaw.
After You Have Finished Sawing The Board To Size, Use A Piece Of Sandpaper To Smooth Out Any Rough Edges On The Board:
This will help to give the skirting board a more professional look as well as making it safer for those who may walk on it.
You can now paint your new skirting boards and they should look perfect.
Use A Saw To Make One Long Cut, But Don’t Go All The Way Through:
This is useful if you don’t have clamps or any other devices to hold the wood in place.
You can always line this up with another piece of skirting board if it helps. Make sure that your measurements are correct before you start cutting, especially when dealing with long pieces of wood.
You Can Now Cut The Second Line:
The pressure should be applied slowly and it will eventually snap off at the cutting point. Don’t try to force it through with brute strength or you could end up with a broken saw blade.
You Can Sand Down Any Rough Edges If You Don’t Like Them:
This will add a more professional look to the skirting board and it will be safer for those who may walk on them.
Now you can paint your newly cut skirting boards in the colour of your choice and they should look perfect when finished.
Once everything is painted, you can reattach these boards back onto the wall and they should look great.
Use Nails Or Screws To Hold Them Together Tightly:
This will prevent any kind of mishaps from happening and it will make the skirting boards look a lot more professional.
You can also use some construction adhesive to fix them in place if this is an easier option for you. If you are worried about the wall then you should use some nails or screws instead so that everything remains sturdy. This is especially important if you have children or pets that may knock into the wall by accident.
Once Everything Is Painted And Secure, You Can Attach The New Skirting Boards Back Onto The Wall And They Should Look Perfect:
Your rooms will now look complete and it won’t cost as much as buying a mitre saw to achieve this. This technique also makes the boards much lighter and they will be easier to handle as well.
This technique uses tools that can be found in most households and it is perfect for those who are on a budget but don’t have access to a mitre saw. If you follow these instructions to the letter then there should be no issues when cutting your skirting boards, however if you run into problems or have any questions then please post them in the comments section below. If you like this article, please like and share to show your support!