How to Cut Worktop with Circular Saw in 2022

Are you looking for a solution to cut the kitchen or washroom worktop with a circular saw? Yes, it is possible, but we also need a plunge saw or router for assistance, along with the circular saw. If you are a DIYer and you don’t have other tools, then you can go for the circular handsaw.

Basically, the circular handsaw is used to cut the counter in length as it is quick and can also be used to carefully cut out the recesses for the hob and sink, specifically for heavy kitchen worktops. I have found it is easiest if I can stab one end into a wall while working alone, but it isn’t neat enough to pass for a finished edge.

Let’s find out the answer to your query, how to cut the worktop with a circular saw in length. It’s so simple; all you need is a bit of practice. First of all, you should have a look at various other benefits of circular saws!

Benefits of the Circular Saw Blade:

The following are some of the benefits of the circular saw blade:

  • Cutting tools that get deeply buried in materials are not like this one; it only has to be unplugged and set to the correct position.
  • It is also possible to use these blades to cut deep concrete or to angle cut.
  • It is compact; you can take it and use it anywhere. Plus, it is versatile, which means it can cut every large material.  
  • You can achieve straight cuts with this saw that isn’t possible with other saw materials.

Complete Process To Cut The Work-Top with Circular Saw:

Following is the step-by-step process for cutting the kitchen worktop in length with the assistance of a circular saw.

Step#1:

Using a circular saw for trimming would be especially beneficial if the edge will be concealed by tiles or a sealant joint. Look at how the edge will fit into the wall then cut with the circular saw. 

Step#2:

Circular handsaw blades are designed to cut upwards, so this will prevent the blade from cutting the face of the worktop as it cuts through the surface. Since circular saw blades do not have a guide rail with a plunge, saw, you must prefer worktop cutting upside down when using a circular saw. Make sure the worktop is supported well and will not move once the cut is made. 

Step#3:

Mark out the measurements with a pencil, draw a fine line, leave the extra space if the wall isn’t square. This is important because otherwise, as you get most of the way through, the last part may break rather than cut if not supported correctly.

Step#4:

To ensure that the cut you make is perfectly straight, it is advised to clamp a straight edge on the saw to guide the blade along the straight edge. To do this, measure the distance between the saw blade and the base of the saw that will slide along the straight edge.

Step#5:

Set the blade depth to zero and then place a straight cut edge against each end of the cut front and back of the counter to validate that it is in the proper position. Repeat the process at least 3 times, deepening each pass.

The Need For Other Tools:

Every tool has its own usage, and to get the perfect smooth finish, you definitely need razor-sharp blades. We prefer to cut edges, it’s joining with another piece of wood or worktop with the fast speed router, and the reason is you will get the professional finished front edge.

The Circular saw provides us the rough edges so it can be used if there is a need to cut straight in length or If the edge will be unseen covered with tiles because the circular saw will leave teeth marks and a less perfect edge. The circular handsaw can also be used to cut out the recesses for the hob and sink carefully.

Some people do not own a Plunge Saw, as they can be costly but Plunge Saws enable setting out and lengthening worktops much more quickly, neatly, and accurately with the help of a rail guide than standard circular saws.

Tips To Cut Worktop With A Circular Saw:

  •  During the process of cutting a worktop, you should consider 2 things: chipping the laminate on the chipboard and jamming the blade.
  • If you plan on cutting a kitchen worktop upside down, it is better to do so because the blade’s teeth cut up, which means there is less chance of chipping
  • It is suitable to use a sharp knife and masking tape instead of turning the worktop upside down and using a sharp blade.
  • You also need a helper to help you with the clean cuts and for holding each and everything.
  • Make the cut from front to back so that you end up with the back of the worktop against the wall.
  • Before cutting the worktop, practice on a scrap piece or using an old laminate worktops board or piece of worktop. It will actually make your cutting skills better.
  • When cutting the worktop, it is better to start or use a circular saw before the blade comes into contact with it, then to let the saw work without pushing forward, pulling forward at a slow, controlled speed throughout the entire length of the cut.
  • Whenever a worktop is being cut, it is recommended that safety goggles and a dust mask are worn.
  • In order to prevent burrs, splinters, and damage from occurring, you should support the worktop from both sides as well as the full length. If needed, use saw benches and a helper to support the worktop.

Wrap It Up!

Whether it is a washroom worktop or a kitchen worktop, cutting them and setting them is not a hot cup of tea. You need proper tools; if you do not have power tools, it’s completely alright. If you have a circular saw, you can don’t your job easily. However, you should keep in your mind that the saw blade should be suitable for sharp and fine cuts, so the laminated chipboard or hardwood kitchen worktops cutting would be easier for you.

The along circular saw is sometimes not enough for the whole task, and you need the assistance of other tools also like plunge saw, router, guide rail so that you will get a smooth and clean edge of the worktop.

We have mentioned every necessary detail and the particular and efficient usage of a circular saw. I hope. This article will help you in the best of your interest.

Furthermore, you can ask anything you want in the comment section below.


Share post on
Emma Avery
By Emma Avery

I'm Emma Avery, founder of Tttools.uk. I founded this site with the goal in mind to provide a place where beginners could learn about saw tools, and have access to resources that would be useful for them (and me!) as they develop their skills. Funnily enough, my favorite thing about running the site is getting feedback from you guys! I love hearing how it's helped you get more confident or achieve your goals; it really means a lot that you're taking the time to send me an email or leave a comment on one of our articles. It's been so educational already learning all about saws and timber framing. Thanks for following along with us!


Saw Guides is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

How To Cut Skirting Boards Without A Mitre Saw? Saw Tips

How To Cut Skirting Boards Without A Mitre Saw?

Skirting boards are a vital component to any room and they need to be...

By Emma Avery
Updated
How To Use A Hole Saw? Saw Tips

How To Use A Hole Saw?

Do you have a need to drill holes in wood, metal or other materials?...

By Emma Avery
Updated
How To Cut Skirting Boards With A Mitre Saw? Saw Tips

How To Cut Skirting Boards With A Mitre Saw?

A lot of people are scared of doing home renovations. They don't know what...

By Emma Avery
Updated
How To Use A Mitre Saw? Simple And Easy Steps Saw Tips

How To Use A Mitre Saw? Simple And Easy Steps

A mitre saw is a power tool that can be used to make accurate...

By Emma Avery
Updated
What Is a Coping Saw Used for? Saw Tips

What Is a Coping Saw Used for?

A coping saw is a type of saw used for cutting curves in wood....

By Emma Avery
Updated
What Is A Tenon Saw Used For? Saw Tips

What Is A Tenon Saw Used For?

A tenon saw is a kind of handsaw that has a blade that curves...

By Emma Avery
Updated
How to Cut Wood Straight with a Hand Saw Saw Tips

How to Cut Wood Straight with a Hand Saw

Hand saws are great for cutting wood, but if you're using one to cut...

By Emma Avery
Updated
How To Use A Tenon Saw: Cutting Wood Like A Pro Saw Tips

How To Use A Tenon Saw: Cutting Wood Like A Pro

Woodworking is a popular hobby for many, and there are plenty of tools that...

By Emma Avery
Updated

Latest Posts

Best Table Saw Under £300 Tested Reviews Saw

Best Table Saw Under £300 Tested Reviews

A table saw is an essential piece of equipment for any woodworker or handyman....

By Emma Avery
Updated
Best Wet Tile Saw Under £300 – Top Picks Reviews Saw

Best Wet Tile Saw Under £300 – Top Picks Reviews

Cutting tiles can be a tough task, especially if you need to make precise...

By Emma Avery
Updated
Best Table Saw Under £1000 UK – Reviewed Picks Saw

Best Table Saw Under £1000 UK – Reviewed Picks

A table saw is an essential piece of equipment for any serious woodworker. Not...

By Emma Avery
Updated
Best Crosscut Saw – Recommended Expert Choice Saw

Best Crosscut Saw – Recommended Expert Choice

A crosscut saw is a woodcutting tool that is used to cut boards along...

By Emma Avery
Updated
How To Cut Skirting Boards Without A Mitre Saw? Saw Tips

How To Cut Skirting Boards Without A Mitre Saw?

Skirting boards are a vital component to any room and they need to be...

By Emma Avery
Updated
Best Table Saw for Beginners – Experienced Options Saw

Best Table Saw for Beginners – Experienced Options

For most woodworking projects, a table saw is an essential tool. Table saws come...

By Emma Avery
Updated
How To Use A Hole Saw? Saw Tips

How To Use A Hole Saw?

Do you have a need to drill holes in wood, metal or other materials?...

By Emma Avery
Updated
Metabo Kgs254m Review – Top Product Review And Key Features Review

Metabo Kgs254m Review – Top Product Review And Key Features

The Metabo KGS254M is the perfect tool for your next project. It’s powerful, accurate,...

By Emma Avery
Updated