Hey folks, as always, we come up with something new! While scrolling up and down, I saw a query, ‘How to use a Floorboard saw‘ and being a professional member of the carpenter’s team; it’s my duty to share my knowledge and experience with you people as well.
There are many tools like Circular Saw, Jigsaw, and also power tools, etc., but these are not designed to do this job. However, the professional, convenient and specific tool to cut the floorboard is the floorboard saw. To find out about this tool, have a look below!
All About Floorboard Saw’s:
Have you seen a toy saw? If so, the floorboard saw is similar to that with having a specific curved nose at the front of it. In these saws, most of them are having. Generally, the blades have two assortments of cutting teeth, one along the bottom edge and one along with the curved nose.
Floorboard saws are specifically designed to cut the various types of flooring before and even after its fixation in the floor like laminate, solid wood Softwood Board, chipboard, Plywood (veneer), MDF, etc. However, keep in mind not to cut the veneer with floorboard before fixing it as they are delicate and thin and cut with a large blade.
Features of Floorboard Saw:
Floorboard saws are having various features and characteristics; you can read the given information about this tool to increase your knowledge. It will also help you in buying the best floorboard saw.
Purpose of the Curved Nose:
The curved nose is also having a certain amount of teeth for the purpose of making plunge cuts in depth. If you are holding it upside-down. A plunge cut is a cut made by entering the material in a vertical position, especially when the floor-boards are already fixed.
A closed pistol grip is usually installed on floorboard saws. The large handle is perfect for lifting it and contributes to the strength of the blade.
Size of the Teeth:
A floorboard saw blade’s teeth tend to be small and shallow so that they cut and remove the material from the accurate side instead of the whole patch. Although it’s a time-consuming process, the results will b neat and clean.
A Cutting Motion:
Some floorboard saws could cut both on the push and pull strokes, meaning you can put pressure at either speed or both for the more aggressive cutting action.
The Saw Blade:
The blade is attached with the saw; you will not get the blade to replace them as these are irreplaceable. They have a curved nose.
Teeth Per Inch (TPI):
There are usually 11 to 13 teeth per inch for floorboard saws, which is high enough to allow them to see through laminate or veneer sheets in floorboards, which are usually glued to the board under. With its high TPI, the floorboard saw is capable of producing a neat finish. Its visible nature is one of the reasons it is often used.
Price Of The Saw:
The price of the floorboard saws is reasonable, not much high like other saws or power tools. So, if you purchase this, simply you are going to save your hard-earned money.
How To Use The Floor-Board Saw?
All you need is to follow the method, and you will easily complete your job!
Cutting Before Fixing Floor-Board:
Before the fixation, you can cut the floorboard with a straight edge instead of the nose. Basically, both sides are having sharp teeth designed for different usage.
First of all, you should rest the blade against the board and pull the saw in one long, slow stroke back towards you. After the small cut, you can cut in a quick motion.
Cutting After Fixing The FloorBoard:
Due to any reason, you need to cut the floorboard, and for this, you can use the saw’s curved nose because it also has the saw teeth. This feature is useful when cutting in the middle of already-laid flooring when an edge is not available.
The best way is to use the saw’s nose when cutting, gripping the handle with your hand and stroking the saw across the floorboard with little downside pressure, and when the nose goes inside the board and cut it, you can simply reposition the saw to precisely cut with the straight edge of the blade.
Have you got the answer to the query ‘how to use a floorboard saw’? I have shared my years of experience with your people and being an expert, I am sure, after a bit of practice, you can easily cut the floorboards easily with the floorboard saw.
Just keep in mind the two important this; one is then you want to cut the already fixed floorboard, use the curved nose, and first fix it on the floor and then start cutting. Secondly, if you are about to fix the board on the floor, cut it with the straight edge of the floorboard saw as there is no purpose for the curved nose.
I hope you will be satisfied with the given information. You can also share your thoughts and your experience with us in the comments section below. Cheers!