How To Use a Sharpen Saw Blade

How To Use a Sharpen Saw Blade

How do you know if your saw blade needs sharpening? Does it leave sawdust and does not yield a good edge? If it does not cut material well and leaves sawdust, it probably needs to be sharpened. However, not all blades are worth sharpening. Some brands offer those hand saw as a circular saw, plunge saw, jigsaw, etc., whose blades cannot be able to sharpen again; instead, you need to replace them.

When you think about saw sharpening, it is essential to keep certain things in mind. For example, some brands now offer blades that are fixed, like some old-style professional saws, and they get blunt over time, so you are allowed to sharpen them.  

Sharp blades are essential for precise, accurate, and clean edges, and you must know how to keep them sharp when they become dull and seem useless.  When it comes to money-saving, you can even get a saw set with blades that are both replaceable and can be sharpened, such as a quality carbide-tipped blade that lasts 15 to 20 sharpening before it needs to be replaced.

If you don’t know how to use sharpen a saw blade, then no worries, I am sharing the best possible ways to do so, just spare your few minutes and have a quick read below!

Best Ways – How to Sharpen a Saw Blade:

Here are the most effective and efficient methods to sharpen the blades. Simply have a look below:

Sharpen Blade Via Taper File:

Taper files are effective tools for saw blade sharpening. You can choose from a small taper file or a larger one depending on the size of your tooth. Either a single or double-cut taper file will effectively sharpen various saw blades.

Regardless of its size, a triangular-shaped file still features three angles positioned at 60 degrees, which is known as an equilateral triangle. This feature means it can simultaneously file both the front and in the opposite direction of a tooth. This method is best to achieve precise results, and it is a very simple and cheap method. All you need is a little effort.

Steps:

  • Step#1: Attach the blade to a vice.
  • Step#2:  Hold the file with one hand on the base and your other hand on the tip.
  • Step#3:  First, tooth should be positioned properly on the filer and make sure they will be even, and start filing them, applying two strokes between the teeth per inch for the continuous result. 
  • Step#4: Check that the file is installed on the saw teeth at the same angle.
  • Step#5: Repeat the process.

Sharpen via Crank Sharpener:

Here is another alternative that is specifically used for chainsaw blades. These are sharpened with crank sharpeners, which span your blade and are operated by cranking the handle. These are portable, not heavy, and ideal for sharpening the blade. This tool can be used by beginners even because it is very simple and efficient.  However, buying this tool needs your hard-earned money because it’s a Lil bit expensive. 

Steps:

  • Step#1: First of all, put the crank sharpener on the table and then over the chain. 
  • Step#2: Once the crank handle is in place, turn it.
  • Step#3: Then the sharpener grips the chain 
  • Step#4: Sharpeners grip the chain and pull it toward the cutting tools.
  • Step#5: Crank sharpening machines typically cut the chain at a 25 to 35-degree angle.

Sharpen Via Automatic Sharpener:

These are similar in usage to the crank sharpeners and specifically designed for the chainsaws. Sharpen your blade in no time; however, this isn’t the most accurate way, or maybe you’ll not get the fine results, but it’s quite fast and simple. 

Steps:

  • Step#1: Put the chainsaw in the sharpener and close the lid.
  • Step#2: Turn the chainsaw on.  
  • Step#3: Push the tips of the sharpener next to the firm flat surface so that the cutting edge of the saw is in contact with the semi-circular saw blade sharpening block.

Sharpen Via Diamond Wheel Sharpener:

Here is the last method to sharpen the saw teeth and tips through a diamond wheel sharpener. It is the hardest and fastest wheel like a grinder and sharpens your blade in a professional manner in no time. Sharpening carbide-tipped saw blades use this grinding tool, usually coated with 400 diamond grit. However, this tool is not for beginners or DIYers because you need much practice to be a pro.

Steps:

  • Step#1: In the very first step, Put the saw blade on the wheel and begin grinding.
  • Step#2:  By using 400 grit, the teeth are brought back into their original shape.
  • Step#4: Make sure you do not press too hard or end up with an uneven result. 
  • Step#5: You should follow the same angle as the blade’s teeth when cutting.

Final Verdict:

What is the easiest, simplest, and most budget-friendly method you can use to sharpen blades? I think sharpening blades with a taper filer would be the simplest, simplest, and most cost-effective method. Choosing the method in which you want to perform your job is now up to you.

I hope that this article will inspire you to sharpen and maintain your hand saw blades. Please comment below to let us know your thoughts concerning this article.


Share post on
Emma Avery
By Emma Avery

I'm Emma Avery, founder of Tttools.uk. I founded this site with the goal in mind to provide a place where beginners could learn about saw tools, and have access to resources that would be useful for them (and me!) as they develop their skills. Funnily enough, my favorite thing about running the site is getting feedback from you guys! I love hearing how it's helped you get more confident or achieve your goals; it really means a lot that you're taking the time to send me an email or leave a comment on one of our articles. It's been so educational already learning all about saws and timber framing. Thanks for following along with us!



Saw Guides is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

How To Cut Skirting Boards Without A Mitre Saw? Saw Tips

How To Cut Skirting Boards Without A Mitre Saw?

Skirting boards are a vital component to any room and they need to be...

By Emma Avery
Updated
How To Use A Hole Saw? Saw Tips

How To Use A Hole Saw?

Do you have a need to drill holes in wood, metal or other materials?...

By Emma Avery
Updated
How To Cut Skirting Boards With A Mitre Saw? Saw Tips

How To Cut Skirting Boards With A Mitre Saw?

A lot of people are scared of doing home renovations. They don't know what...

By Emma Avery
Updated
How To Use A Mitre Saw? Simple And Easy Steps Saw Tips

How To Use A Mitre Saw? Simple And Easy Steps

A mitre saw is a power tool that can be used to make accurate...

By Emma Avery
Updated
What Is a Coping Saw Used for? Saw Tips

What Is a Coping Saw Used for?

A coping saw is a type of saw used for cutting curves in wood....

By Emma Avery
Updated
What Is A Tenon Saw Used For? Saw Tips

What Is A Tenon Saw Used For?

A tenon saw is a kind of handsaw that has a blade that curves...

By Emma Avery
Updated
How to Cut Wood Straight with a Hand Saw Saw Tips

How to Cut Wood Straight with a Hand Saw

Hand saws are great for cutting wood, but if you're using one to cut...

By Emma Avery
Updated
How To Use A Tenon Saw: Cutting Wood Like A Pro Saw Tips

How To Use A Tenon Saw: Cutting Wood Like A Pro

Woodworking is a popular hobby for many, and there are plenty of tools that...

By Emma Avery
Updated

Latest Posts

10 Best Table Saw Under £300 Tested Reviews Saw

10 Best Table Saw Under £300 Tested Reviews

A table saw is an essential piece of equipment for any woodworker or handyman....

By Emma Avery
Updated
Best Wet Tile Saw Under £300 – Top 8 Picks Reviews Saw

Best Wet Tile Saw Under £300 – Top 8 Picks Reviews

Cutting tiles can be a tough task, especially if you need to make precise...

By Emma Avery
Updated
Best Table Saw Under £1000 UK – Reviewed Expert Picks Saw

Best Table Saw Under £1000 UK – Reviewed Expert Picks

A table saw is an essential piece of equipment for any serious woodworker. Not...

By Emma Avery
Updated
Best Crosscut Saw – All You Need to Know About Our Top Picks Saw

Best Crosscut Saw – All You Need to Know About Our Top Picks

A crosscut saw is a woodcutting tool that is used to cut boards along...

By Emma Avery
Updated
How To Cut Skirting Boards Without A Mitre Saw? Saw Tips

How To Cut Skirting Boards Without A Mitre Saw?

Skirting boards are a vital component to any room and they need to be...

By Emma Avery
Updated
Best Table Saw for Beginners – Top 9 Affordable Options Saw

Best Table Saw for Beginners – Top 9 Affordable Options

For most woodworking projects, a table saw is an essential tool. Table saws come...

By Emma Avery
Updated
How To Use A Hole Saw? Saw Tips

How To Use A Hole Saw?

Do you have a need to drill holes in wood, metal or other materials?...

By Emma Avery
Updated
Metabo Kgs254m Review – Top Product Review and Key Features Review

Metabo Kgs254m Review – Top Product Review and Key Features

The Metabo KGS254M is the perfect tool for your next project. It’s powerful, accurate,...

By Emma Avery
Updated